TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 444 of 620
TM 9-2520-272-40 0056 REMOVE RANGE PACK NOTE Transmission is on maintenance stand, left end up. Procedures for installing the fabricated range pack retaining f xture are given in WP 0055. 1. Remove bolt (Figure 1, Item 7) that holds previously installed fabricated retaining f xture (Figure 1, Item 2) to center housing (Figure 1, Item 1). 2. Turn forward clutch housing assembly (Figure 1, Item 6) so that one opening that has slots (Figure 1, Item 3) is positioned over pitot (Figure 1, Item 5). 3. Remove two screws (Figure 1, Item 4). 4. Remove pitot (Figure 1, Item 5). NOTE Refer to WP 0051 for repair of forward clutch housing assembly. 5. Remove forward clutch housing assembly (Figure 1, Item 6). Move forward clutch housing assembly (Figure 1, Item 6) back and forth to free it, if necessary. Figure 1. Forward Clutch Housing Assembly Removal. 0056‐2