TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 441 of 620
TM 9-2520-272-40 0055 SUSTAINMENT MAINTENANCE INSTALL/REMOVE FABRICATED RANGE PACK RETAINING FIXTURE INITIAL SETUP: Tools and Special Tools Retaining Fixture (WP 0075, Item 1) Tool Kit, General Mechanic’s (GMTK) (WP 0079, Item 45) Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft (WP 0079, Item 51) Personnel Required Track Vehicle Repairer, 91H10 Equipment Condition Transmission removed from vehicle or container (TM 9-2350-277-13&P) Oil f ll tube assembly removed (WP 0006) Left cover assembly removed (WP 0033) INSTALL FABRICATED RANGE PACK RETAINING FIXTURE NOTE Retaining f xture is installed to prevent range pack from shifting when transmission is rotated. 1. Align hole in retaining f xture (Figure 1, Item 1) with one of three left cover bolt holes (Figure 1, Item 3) located nearest to forward clutch housing assembly (Figure 1, Item 2). 2. Install 3/8-16 x 3/4 in. bolt (Figure 1, Item 5) and 3/8 in. washer (Figure 1, Item 4) in selected bolt hole (Figure 1, Item 3). 3. Torque bolt (Figure 1, Item 5) to 27 to 32 lb-ft (37 to 43 N·m). Figure 1. Range Pack Retaining Fixture Installation. END OF TASK 0055‐1