TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 403 of 620
TM 9-2520-272-40 0049 Install Bearings WARNING Hot parts can burn you. Always wear leather gloves when working with parts that are or might be hot. 1. Apply heat to bearing retaining plate (Figure 5, Item 10) with heat gun for one hour. 2. Push new outer race of bearing (Figure 5, Item 9) against shoulder of bearing retaining plate (Figure 5, Item 10). 3. Push against the end of bearing that has numbers (Figure 5, Item 9) to install inner race and rollers of bearing (Figure 5, Item 9) against the shoulder of hydrostatic pump idler gear (Figure 5, Item 8). 4. Push against the end of bearing that has numbers (Figure 5, Item 7) to install inner race and rollers of bearing (Figure 5, Item 7) against the shoulder of hydrostatic pump idler gear (Figure 5, Item 8). Figure 5. Hydrostatic Pump Idler Gear and Bearing Retaining Plate Bearings Installation. 0049‐5