TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 395 of 620
TM 9-2520-272-40 0048 NOTE If left cover has not been removed, go to Step 4. If left cover has been removed, go to Step 5. 4. Use puller to remove left output shaft (Figure 2, Item 2). Go to Step 9. 5. Turn transmission front up. 6. Insert drift pin (Figure 2, Item 5) through output shaft hole in left side of transmission and through output pump drive gear (Figure 2, Item 4) to bottom of left output shaft (Figure 2, Item 2) in right side of transmission. 7. Use a hammer to tap drift pin (Figure 2, Item 5) to remove left output shaft (Figure 2, Item 2) from transmission. 8. Turn transmission right end up. 9. Remove output pump drive gear (Figure 3, Item 4) from right side of transmission. Figure 2. Left Output Shaft Removal. Figure 3. Output Pump Drive Gear Removal. FOLLOW-ON MAINTENANCE Refer to WP 0049 for replacement of bearing on left output shaft (Figure 2, Item 2). END OF TASK 0048‐3