TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 388 of 620
TM 9-2520-272-40 0046 14.Install two retaining rings (Figure 5, Item 11) onto two pins (Figure 5, Item 10). 15.Install two pins (Figure 5, Item 10) to a height of 1.01 to 1.05 in. (25.7 to 26.6 mm) above outside surface of left brake support (Figure 5, Item 2). WARNING Hot parts can burn you. Always wear leather gloves when working with parts that are or might be hot. 16.Apply heat to left brake support (Figure 5, Item 2) with heat gun near locations for bearing races (Figure 5, Item 1) and (Figure 5, Item 3) and (Figure 5, Item 4) for one hour. Figure 5. Retaining Rings and Pins Installation, Heat Application. 0046‐6