TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 365 of 620
TM 9-2520-272-40 0045 3. Position left brake support (Figure 3, Item 3) on wooden blocks (Figure 3, Item 9) as shown in Figure 3. 4. Loosen two retainer bolts (Figure 3, Item 7). Loosen three stationary cam bolts (Figure 3, Item 5). Loosen bolts (Figure 3, Item 7) and (Figure 3, Item 5) until bolt heads are approximately 0.25 in. (6.5 mm) out of holes in left brake support (Figure 3, Item 3). 5. Tap bolt heads (Figure 3, Item 7) and (Figure 3, Item 5) to loosen retainer and stationary cam located below left brake support (Figure 3, Item 3). 6. Remove two bolts (Figure 3, Item 7) and two washers (Figure 3, Item 8) from left brake support (Figure 3, Item 3). Remove three bolts (Figure 3, Item 5) and three washers (Figure 3, Item 6) from left brake support (Figure 3, Item 3). Figure 3. Left Brake Support Hardware Removal. 0045‐3