TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 363 of 620
TM 9-2520-272-40 0045 SUSTAINMENT MAINTENANCE REPLACE LEFT BRAKE ASSEMBLY INITIAL SETUP: Tools and Special Tools Hammer, Hand, Soft-Face, Dead Blow, 52 oz (WP 0079, Item 19) Pliers Set, Retaining Ring (WP 0079, Item 27) Shim (WP 0075, Item 5) Stand, Maintenance, Automotive (WP 0079, Item 40) Tool Kit, General Mechanic’s (GMTK) (WP 0079, Item 45) Wrench, Torque, Dial, 3/8” Drive, 300 lb-in. (WP 0079, Item 50) Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft (WP 0079, Item 51) Materials/Parts Bands, Rubber No. 19 (WP 0078, Item 2) (2) Block, Wood, Lumber, Soft Wood (WP 0078, Item 3) (2 - 16 in. lengths) Gasket (WP 0080, Item 50) Lubricating Oil, Engine (WP 0078, Item 10) O-Ring (WP 0080, Item 51) Petrolatum, Technical (Petroleum Jelly) (WP 0078, Item 12) Ring Retaining (Seal Ring, Metal) (WP 0080, Item 15) Sealant, Lubricating, Thread-Locking (WP 0078, Item 15) Seal Ring, Metal (WP 0080, Item 13) Seal Ring, Metal (WP 0080, Item 16) Seal, Brake Coolant (WP 0080, Item 34) Personnel Required Track Vehicle Repairer, 91H10 (2) References TM 9-214 WP 0046 WP 0047 Equipment Condition Transmission removed from vehicle or container (TM 9-2350-277-13&P) Oil f ll tube assembly removed (WP 0006) Right cover assembly removed (WP 0016) REMOVE LEFT BRAKE ASSEMBLY NOTE Transmission is on maintenance stand, right end turned up. 1. Remove 15 bolts (Figure 1, Item 1) and 15 washers (Figure 1, Item 2) from left brake support (Figure 1, Item 3). Figure 1. Right Cover Assembly Hardware Removal from Left Brake Support. 0045‐1