TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 359 of 620
TM 9-2520-272-40 0044 SUSTAINMENT MAINTENANCE REPLACE SUMP COMMUNICATION TUBE INITIAL SETUP: Tools and Special Tools Hammer, Hand, Soft-Face, Dead Blow, 52 oz (WP 0079, Item 19) Stand, Maintenance, Automotive (WP 0079, Item 40) Tool Kit, General Mechanic’s (GMTK) (WP 0079, Item 45) Materials/Parts Petrolatum, Technical (Petroleum Jelly) (WP 0078, Item 12) Personnel Required Track Vehicle Repairer, 91H10 Equipment Condition Transmission removed from vehicle or container (TM 9-2350-277-13&P) Oil f ll tube assembly removed (WP 0006) Input housing assembly removed (WP 0042) REMOVE SUMP COMMUNICATION TUBE NOTE If sump communication tube is in position, tube does not need to be removed unless bevel gear assembly is to be removed or tube is defective. If tube must be removed, proceed with Steps 1, 2, and 3. 1. Use the rotary control handle on the maintenance stand to turn the transmission so that input housing (Figure 1, Item 1) is in up position. 2. Tap end of sump communication tube (Figure 1, Item 3) at center housing assembly (Figure 1, Item 2) on left until tube moves into center housing assembly. Figure 1. Sump Communication Tube, Tap Out from Left End. 0044‐1