TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 33 of 620
TM 9-2520-272-40 0001 SUSTAINMENT MAINTENANCE GENERAL INFORMATION SCOPE This manual addresses Sustainment Maintenance for the Allison Transmission Hydrokinetic Cross-Drive Transmission, Model X200-4A. Field Maintenance is addressed as necessary. The purpose of this equipment is to transmit power from the engine to the f nal drive. The transmission provides steering and braking for the vehicle. The X200-4A Transmission is part of the vehicle drive system for the M113 Family of Vehicles. Figure1. Hydrokinetic Cross-Drive Transmission, Model X200-4A, Right Front External View. MAINTENANCE FORMS, RECORDS, AND REPORTS Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA PAM 750-8, The Army Maintenance Management System (TAMMS) Users Manual. 0001‐ 1 REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR) If your transmission needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you do not like about your equipment. Let us know why you do not like the design or performance. If you have Internet access, the easiest and fastest way to report problems or suggestions is to follow the instructions and links below: For ALL non-Aviation/Missile Warranty, EIR and PQDRs must be submitted through the Web Product Quality Deficiency Reporting (PQDR) site. The Web PQDR site is: http://www.nslcptsmh.csd.disa.mil/webpqdr/webpqdr.htm . New accounts can be established at the following address: http://www.nslcptsmh.csd.disa.mil/accessforms/uarform.htm . You may also submit your information using an SF 368 (Product Quality Deficiency Report). You can send your SF 368 using e-mail, regular mail, or fax using the addresses/fax numbers specified in DA PAM 750-8, The Army Maintenance Management System (TAMMS) Users Manual. We will send you a reply.