TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 326 of 620
TM 9-2520-272-40 0040 Assemble Stator Group 1. Install retaining ring (Figure 5, Item 20) into stator (Figure 5, Item 19). 2. Install clutch disk (front stator washer) (Figure 5, Item 18). 3. Install race (Figure 5, Item 17) and bearing (Figure 5, Item 16). 4. Install thrust washer (Figure 5, Item 15). 5. Install race (Figure 5, Item 11). 6. Install cam (Figure 5, Item 12). 7. Use petrolatum to hold parts in position and install 12 springs (Figure 5, Item 13) and rollers (Figure 5, Item 14) into cam (Figure 5, Item 12) in position shown in illustration. The open end of the spring touching the roller must be toward the center of cam (Figure 5, Item 12). Rollers (Figure 5, Item 14) are installed in the shallow ends of cam (Figure 5, Item 12) pockets. 8. Install thrust washer (Figure 5, Item 10). 9. Install rear stator washer (Figure 5, Item 9). 10.Install retaining ring (Figure 5, Item 8). Figure 5. Stator Components Assembly. END OF TASK END OF WORK PACKAGE 0040‐4