TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 314 of 620
TM 9-2520-272-40 0039 10.Bend all eight tabs of locking strips (Figure 13, Item 19) at ends of four converter bearing retainer plates (Figure 13, Item 20) so that tabs are against f ats of cap screws (Figure 13, Item 18). NOTE Do not lubricate the 13.750 in. (349.25 mm) Inside Diameter (ID) gasket installed in the next step. 11.Install new gasket (Figure 13, Item 16) in groove near pump studs (Figure 13, Item 21). Figure 13. Gasket Installation. 0039‐14