TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 303 of 620
TM 9-2520-272-40 0039 5. Put the pry bar (Figure 2, Item 6) between two studs (Figure 2, Item 7) to keep the converter pump cover assembly (Figure 2, Item 1) from turning when loosening nuts (Figure 2, Item 8). 6. Remove 24 self-locking hex nuts (Figure 2, Item 8) that attach the converter pump cover assembly (Figure 2, Item 1). Discard self-locking hex nuts (Figure 2, Item 8). Figure 2. Converter Pump Cover Assembly Hardware Removal. NOTE Tap converter pump cover assembly with plastic-faced hammer to loosen, if necessary. 7. Using f ngers, pull up on two studs (Figure 3, Item 7) that are opposite each other and remove the converter pump cover assembly (Figure 3, Item 1) from the transmission. Figure 3. Converter Pump Cover Assembly Removal. 0039‐3