TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 29 of 620
TM 9-2520-272-40 HOW TO USE THIS MANUAL – (Continued) EXPENDABLE AND DURABLE ITEMS Expendable and durable items are called out under Materials/Parts in the Initial Setup section of maintenance procedures, when required, along with a reference to WP 0078, where the full list can be found. For example, the notation “(WP 0078, Item 8)” following the name of a supply item means that the description of the item is located on the list of expendable items, WP 0078, under Item 8. SPECIAL CONDITIONS Special conditions, such as unusual environmental conditions, are shown in a note before procedural steps begin. The most common note regarding special conditions occurs in procedures when the transmission is mounted on the maintenance stand. Procedures that must be accomplished before you can perform your assigned maintenance task are shown on the initial setup page under Equipment Conditions. Usually, Equipment Conditions will show only one procedure to be done just before your assigned step. When you go back to the work package shown in Equipment Conditions, you may f nd another equipment condition in that work package. This arrangement of cross-referencing work package with preliminary steps continues in sequence until you get back to the very f rst work package required. Additional procedures that must be accomplished after your assigned work package has been completed are shown under Follow-On Maintenance. FINAL ADJUSTMENTS AND PREPARATION FOR STORAGE AND SHIPMENT After the transmission has been repaired, preliminary brake adjustment must be made by torque wrench check be- fore the transmission is placed in the container. The torque wrench brake check is provided in Chapter 3 (WP 0064). REFERENCES TO OTHER PUBLICATIONS Chapter 4 (WP 0077) provides a reference list of other manuals or publications that may provide additional information for your maintenance tasks. ILLUSTRATED LIST OF MANUFACTURED ITEMS WP 0075, Illustrated List of Manufactured Items, provides information for making locally fabricated items. These items are called out on the Initial Setup pages of procedures under Tools and Special Tools where reference is made to the Work Package, such as “(WP 0075, Item 1)”. WP 0075 contains procedures and illustrations to manufacture the required part. TORQUE LIMITS This work package (WP 0076) provides a reference of standard torque specif cations of standard bolts used in the maintenance and repair of the X200-4A Transmission and its metal storage and shipping container. These values are provided as a reference and are not to override or change specif c torque values given in the maintenance work packages. In some applications a nonstandard torque may be specif ed in the maintenance work package. GLOSSARY The glossary contains abbreviations, terms, and def nitions which may be unique to transmissions. Words or terms that are generally understood among maintenance personnel are not listed in the glossary. xix/xx blank