TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 264 of 620
TM 9-2520-272-40 0033 INSTALL LEFT COVER ASSEMBLY NOTE Transmission is on maintenance stand, left end turned up. 1. Install two 3/8-16 x 4 inch guide pins (Figure 3, Item 9) into center housing assembly (Figure 3, Item 7). 2. Install new left cover gasket (Figure 4, Item 8) on center housing assembly (Figure 4, Item 7), over guide pins (Figure 3, Item 9). 3. Install 3/8 inch f at washer (Figure 4, Item 9) on each of two 3/8-16 x 2 inch bolts (Figure 4, Item 8) and install bolts through two lugs of multiple-leg sling. NOTE Bolts should not extend beyond the inside surface of left cover. If tips of bolts extend beyond surface of end cover, then the cover will not seat on gasket. 4. Install two bolts (Figure 4, Item 5) in two holes (Figure 4, Item 4) in the left cover assembly (Figure 4, Item 1). Figure 3. Guide Pins Installation. 0033‐4