TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 234 of 620
TM 9-2520-272-40 0029 REMOVE OUTER (RIGHT) STEER SHAFT, RANGE OUTPUT GEARS, STEER SHAFT DRIVE GEAR, OUTPUT DRIVEN GEAR, AND BEARINGS CAUTION Do the steps in this procedure to remove the components. Failure to comply will let components fall out of the transmission when the uncovered right side is turned to point down. NOTE The outer (right) steer shaft may come out when the right cover assembly is removed. If necessary, move the shaft back and forth lightly to remove it. The retaining rings on the steer shafts are stops. Do not remove them unless they show damage. 1. Remove outer (right) steer shaft (Figure 1, Item 2) from steer shaft drive gear (Figure 1, Item 4) in transmission (Figure 1, Item 3). 2. Remove two retaining rings (Figure 1, Item 1) from shaft (Figure 1, Item 2) if you observe such damage as them being out of round, bent, or if their tension is lost. Figure 1. Outer (Right) Steer Shaft Removal. 0029‐2