TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 230 of 620
TM 9-2520-272-40 0028 6. Turn right cover assembly (Figure 5, Item 5) over, inside up, on wooden blocks. 7. Apply a thin coat of petrolatum to inner surface of output shaft seal (Figure 5, Item 4). 8. Start short end of right output shaft (Figure 5, Item 1) and retainer bearing assembly (Figure 5, Item 2) into output shaft seal (Figure 5, Item 4). Turn shaft while pushing end of shaft through seal. 9. Turn right cover assembly over and check that output seal (Figure 5, Item 4) stays in position in right cover assembly (Figure 5, Item 5), and that lip on seal is not twisted when right output shaft (Figure 5, Item 1) passes through output shaft seal (Figure 5, Item 4). Figure 5. Right Output Shaft Installation. 0028‐6