TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 228 of 620
TM 9-2520-272-40 0028 INSTALL RIGHT OUTPUT SHAFT WARNING Do a check of slings and trestle for cuts, breaks, or wear before hoisting right cover assembly and during hoisting. Slings and trestle devices can break and cause injury or death. Right cover assembly weighs approximately 125 lb (57.1 kg). When lifting right cover assembly, a hoist and trestle must be used to avoid bodily injury. 1. Refer to TM 9-2350-277-13&P to install output shaft seal in right cover assembly. WARNING Frozen parts can bond to your f ngers and cause serious injury. Always wear leather gloves when working with parts that have been frozen in dry ice. 2. Apply petrolatum and lubricating oil to retaining bearing assembly journal of right output shaft (Figure 3, Item 1). 3. Install retaining bearing assembly (Figure 3, Item 2), numbered end out, on output shaft (Figure 3, Item 1). Push retaining bearing assembly (Figure 3, Item 2) to shoulder. Figure 3. Retaining Bearing Assembly Installation on Output Shaft. 0028‐4