TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 227 of 620
TM 9-2520-272-40 0028 2. Turn right cover assembly (Figure 2, Item 5) over, external side up, on two wooden blocks. 3. Remove right output shaft (Figure 2, Item 1), retaining bearing assembly (Figure 2, Item 2), and sleeve (Figure 2, Item 6) from output shaft seal (Figure 2, Item 4) in right cover assembly (Figure 2, Item 5). 4. Refer to TM 9-2350-277-13&P to remove output shaft seal from right cover assembly. NOTE When retaining bearing assembly is removed from right output shaft, sleeve is pushed ahead of retaining bearing assembly. 5. Make sure retaining bearing assembly (Figure 2, Item 2) and sleeve (Figure 2, Item 6) are serviceable. If retaining bearing assembly or sleeve needs to be replaced, push retaining bearing assembly (Figure 2, Item 2) and sleeve (Figure 2, Item 6) from right output shaft (Figure 2, Item 1). Figure 2. Right Output Shaft Removal. END OF TASK 0028‐3