TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 212 of 620
TM 9-2520-272-40 0026 REMOVE RIGHT BRAKE APPLY CAM SHAFT NOTE Right cover assembly on two wooden blocks, inner side turned up. Right brake apply cam shaft may have come out with right brake support or it may be in right cover assembly. Tension between right brake apply cam shaft and seal usually causes shaft to stay in end cover. Right brake apply cam shaft should come out of the right cover assembly when right brake apply cam shaft is pulled. If right brake apply cam shaft stays on seal, turn right cover assembly over and tap on taped end of right brake apply cam shaft. 1. Remove right brake apply cam shaft (Figure 1, Item 4) from right cover assembly (Figure 1, Item 3). NOTE Washer may stay with right cover assembly or it may come out with right brake apply cam shaft. Thrust washer may have stayed with right brake support or it may be on right brake apply cam shaft. 2. Remove washer (Figure 1, Item 2) from right brake apply cam shaft (Figure 1, Item 4) or right cover assembly (Figure 1, Item 3). 3. Remove thrust washer (Figure 1, Item 1) from right brake apply cam shaft (Figure 1, Item 4), if present. Figure 1. Right Brake Apply Cam Shaft Removal. 0026‐2