TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 209 of 620
TM 9-2520-272-40 0025 15.Install brake apply cam (Figure 23, Item 4) while installing ball end of inner brake adjusting link (Figure 23, Item 7) in pocket of right brake apply cam shaft (Figure 23, Item 47) so that pin (Figure 23, Item 48) is in the retaining slot. 16.Push ball end of link (Figure 23, Item 7) into cam shaft (Figure 23, Item 47) pocket as far as ball will go. Figure 21. Right Brake Apply Cam, Link, and Brake Apply Shaft Installation. 17.Turn brake apply cam (Figure 24, Item 4) clockwise until the projection on the cam hits against the outer brake adjust link (Figure 24, Item 8) and the cam will no longer turn. 18.Place one hand on brake apply cam (Figure 24, Item 4) and apply a small amount of down force. 19.Turn slotted tip (Figure 24, Item 49) of outer brake adjust link (Figure 24, Item 8) counterclockwise with a screwdriver in the other hand until tension is felt on the screwdriver. Continue to turn screwdriver 1/2 to 3/4 of a turn. Figure 22. Right Brake Apply Cam Final Adjustments. END OF TASK END OF WORK PACKAGE 0025-19/20 blank