TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 203 of 620
TM 9-2520-272-40 0025 CAUTION Unless the brake clutch pack is new, keep all friction and reaction plates in the same order and facing the same way. When one plate is replaced, replace the entire clutch pack. Each used plate has made its own contour and wear pattern. The clutch assembly may not operate effectively because plates in the pack may have poor surface contact when: A plate is turned over. A plate position in the pack is changed. A new plate is inserted in the pack. NOTE A brake clutch pack has six internally splined friction plates and f ve reaction (steel) plates and should be put fully into lubricating oil for a minimum of two minutes before installing the pack. 17.Soak brake clutch pack (Figure 13, Item 36) in lubricating oil for a minimum of two minutes. Figure 13. Brake Pack. 0025‐13