TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 192 of 620
TM 9-2520-272-40 0025 REMOVE BRAKE APPLY CAM, BRAKE ADJUSTING LINKS, AND RIGHT BRAKE ASSEMBLY NOTE Right cover assembly on work table is turned inside up. Brake apply (rotating) cam, eight balls, and brake adjusting linkage may come out with right brake support assembly, or these parts may stay with the right cover assembly. External seal rings (inner and outer) may come out attached to the stationary cam, or they may stay in the brake apply cam. Procedures in this task are based upon above components staying with right cover assembly. 1. Remove brake apply cam (Figure 1, Item 4), eight balls (Figure 1, Item 3), and brake adjusting linkage (Figure 1, Item 1) from right cover assembly (Figure 1, Item 2). Put balls (Figure 1, Item 3) in a container. Figure 1. Brake Apply Cam and Brake Adjusting Linkage Removal. 0025‐2