TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 190 of 620
TM 9-2520-272-40 0024 26.Turn the right brake support assembly (Figure 9, Item 6) over so that the external side points up. 27.Install the needle bearing (Figure 9, Item 9) with the driver against the numbered end of the bearing case. Push the needle bearing to 0.060 to 0.070 in. (1.52 to 1.78 mm) below the surface of the right brake support assembly (Figure 9, Item 6). WARNING Frozen parts can stick to your f ngers and cause serious injury. Always wear leather gloves when working with parts that have been frozen in dry ice. 28.Put the tube coupling (Figure 9, Item 4) in technical carbon dioxide (dry ice) for one hour. 29.Install the tube coupling (Figure 9, Item 4), with the end that has grooves facing out, into the right brake support assembly (Figure 9, Item 6). Push the tube coupling f ush to stop. 30.Install the tube coupling (Figure 9, Item 3), with the end that has grooves facing out, into the right brake support assembly (Figure 9, Item 6). Push the tube coupling to a height of 0.620 to 0.660 in. (14.75 to 16.76 mm) above the shoulder. 31.Put the bearing races (Figure 9, Item 7) and (Figure 9, Item 8) in technical carbon dioxide (dry ice) for one hour. 32.Install the bearing races (Figure 9, Item 7) and (Figure 9, Item 8) in the right brake support assembly (Figure 9, Item 6). Push the bearing races to the shoulder. Figure 9. Needle Bearing, Tube Coupling, and Bearing Races Installation. END OF TASK END OF WORK PACKAGE 0024‐10