TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 186 of 620
TM 9-2520-272-40 0024 14.Cut two slots 180 degrees apart at the base of the bearing race (Figure 5, Item 8) as shown in Figure 4. Cut the slots deep enough to catch the end of the chisel but not deep enough to cut into the right brake support assembly (Figure 5, Item 6). WARNING Hot parts can burn you. Always wear leather gloves when working with parts that are or might be hot. 15.Apply heat to the right brake support assembly (Figure 5, Item 6) with heat gun around the bearing race (Figure 5, Item 8) for 15 minutes. CAUTION Be careful not to cause damage to the right brake support assembly (Figure 5, Item 5) when you remove the bearing race. 16.Turn the right brake support assembly (Figure 5, Item 6) over and remove the bearing race (Figure 5, Item 8). 0024‐6