TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 165 of 620
TM 9-2520-272-40 0022 SUSTAINMENT MAINTENANCE REPAIR LEFT BRAKE APPLY SHAFT ASSEMBLY INITIAL SETUP: Tools and Special Tools Gage, Vernier Caliper, 0-6” (WP 0079, Item 18) Tool Kit, General Mechanic’s (GMTK) (WP 0079, Item 45) Materials/Parts Pin, Spring (WP 0080, Item 23) Personnel Required Track Vehicle Repairer, 91H10 Equipment Condition Transmission removed from vehicle or container (TM 9-2350-277-13&P) Oil f ll tube assembly removed (WP 0006) Left brake apply shaft assembly removed (WP 0021) REPAIR LEFT BRAKE APPLY SHAFT ASSEMBLY Remove Pin 1. Remove spring pin (Figure 1, Item 1) from left brake apply shaft (Figure 1, Item 2). Discard pin (Figure 1, Item 1). Install Pin 1. Install new spring pin (Figure 1, Item 1) in left brake apply shaft (Figure 1, Item 2) to a depth of 0.027 to 0.047 in. (0.68 to 1.19 mm) below external surface of left brake apply shaft (Figure 1, Item 2). Figure 1. Left Brake Apply Shaft Assembly. END OF TASK END OF WORK PACKAGE 0022-1/2 blank