TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 162 of 620
TM 9-2520-272-40 0021 8. Turn the left brake apply shaft (Figure 7, Item 1) to the left or right while you insert it. Carefully push the shaft into the bore until the left brake apply shaft is installed in the right cover assembly (Figure 7, Item 5). NOTE When you turn over the right cover, hold the left brake apply shaft in position to keep it from falling out. 9. Hold the left brake apply shaft (Figure 7, Item 1) in position and turn the right cover assembly (Figure 7, Item 5) over so that the external side points up. Put a wooden block under the right cover assembly so that it holds up the left brake apply shaft. 10.Remove the protective tape from the end of the left brake apply shaft (Figure 7, Item 1) and the right brake apply cam shaft (Figure 7, Item 4). Figure 6. Right Cover Assembly External Side Up. END OF TASK 0021‐6