TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 161 of 620
TM 9-2520-272-40 0021 CAUTION When you push the brake apply shaft through the seal, make sure that the spring in the seal stays in place. Put one hand on the exterior of the right cover on the brake apply shaft bore with one f nger on the spring in the seal to keep the spring in place while the end of the shaft goes through. If the spring moves out of its correct position, it may cause leaks in the seal. 7. Put one hand on the exterior of the right cover assembly (Figure 6, Item 5) on the left brake apply shaft (Figure 6, Item 1) bore with one f nger on the spring (Figure 5, Item 10) in the seal (Figure 5, Item 9) until the end of the left brake apply shaft (Figure 6, Item 1) that has tape on it goes through. Figure 4. Seal and Spring. Figure 5. Left Brake Apply Shaft Installation. 0021‐5