TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download

Page 148 of 620

TM 9-2520-272-40 0019 INSTALL BRAKE APPLY REGULATOR VALVE COMPONENTS NOTE Make sure that the right cover assembly is turned so that the internal side points up. 1. Install the spring (Figure 4, Item 3) on the brake apply valve body (Figure 4, Item 8). NOTE Make sure that the brake apply regulator valve assembly moves freely in the body by its own weight. 2. Apply lubricating oil to the brake apply regulator valve assembly (Figure 4, Item 2). 3. Install the spring (Figure 4, Item 3) and the brake apply regulator valve assembly (Figure 4, Item 2) in the brake apply valve body (Figure 4, Item 8). Figure 4. Brake Apply Regulator Valve Components Installation. WARNING Spring-loaded parts can f y and cause you injury. Always obey specif ed instructions when you remove bolts from covers that are attached to valve assemblies. 4. Push the brake apply regulator valve assembly (Figure 5, Item 2) through the brake apply valve body (Figure 5, Item 8) so that the nut (Figure 5, Item 6) on the end of the valve assembly extends out of the body. 00196