TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download

Page 138 of 620

TM 9-2520-272-40 0018 REMOVE COOLER LINE ELBOW WARNING Check slings and trestle for cuts, breaks, or wear before and during lift. Slings and trestle can break and cause injury or death. Right cover assembly weighs approximately 125 lb (57.1 kg). When lifting right cover assembly, you must use a hoist and trestle to avoid bodily injury. NOTE X200-4A Transmissions have a one-piece elbow conf guration and no separate connector (adapter). To remove or install the elbow on an assembled transmission, it is necessary to f rst remove the right lifting bracket and top cover assembly (WP 0007). Make sure the right cover assembly is turned so that the external side is up. 1. Remove the elbow (Figure 1, Item 1) and the O-ring (Figure 1, Item 2) from the right cover assembly (Figure 1, Item 3). 00182