TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 129 of 620
TM 9-2520-272-40 0017 27.Turn right cover assembly (Figure 8, Item 1) over, outside up. 28.Remove 3/8 in. pipe plug (Figure 8, Item 18). 29.Remove two 1/8 in. pipe plugs (Figure 8, Item 16) and (Figure 8, Item 17). 30.Remove 1/4 in. pipe plug (Figure 8, Item 15). 31.Remove 3/8 in. pipe plug (Figure 8, Item 19). 32.Check right cover assembly bearing bore for damage. Smooth out scratches with crocus cloth. If grinding damage is present, replace right cover assembly. CAUTION When using grinder, use care as not to damage housing when cutting slots into sleeve. NOTE Remove sleeve only if sleeve is visibly damaged or when reworking housing due to damage to the output seal area. 33.Cut two slots 180 degrees apart in sleeve (Figure 8, Item 14). 34.Break sleeve (Figure 8, Item 14) at slots. Discard sleeve (Figure 8, Item 14). Figure 8. Pipe Plugs and Sleeve Removal. END OF TASK 0017‐9