TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 122 of 620
TM 9-2520-272-40 0017 DISASSEMBLE RIGHT COVER ASSEMBLY NOTE Right cover assembly is mounted on two wooden blocks, inside up. 1. Put pin punch in left brake apply bore beyond bearing (Figure 1, Item 3) so that edge of punch is seated behind edge of seal (Figure 1, Item 4). 2. Remove seal (Figure 1, Item 4) from bore in right cover assembly (Figure 1, Item 1). 3. Remove seal (Figure 1, Item 5) from beyond bearing (Figure 1, Item 2) in right brake apply cam shaft bore. 4. Turn right cover assembly (Figure 1, Item 1) over, outside up. 5. Remove bearings (Figure 1, Item 2) and (Figure 1, Item 3) from right cover assembly (Figure 1, Item 1). Figure 1. Seals and Bearings Removal. 0017‐2