TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 120 of 620
TM 9-2520-272-40 0016 12.Install the new right brake adjusting cover gasket (Figure 8, Item 5) and the right brake adjusting cover (Figure 8, Item 4) on the right cover assembly (Figure 8, Item 1). NOTE Of the six bolts and washers that attach the brake adjusting cover to the end cover, the chain for oil f ller cap is bolted under the top outside bolt and washer. The bolt is installed at the hole closest to the f ller cap. 13.Install six bolts (Figure 8, Item 2) and six washers (Figure 8, Item 3) in the right brake adjusting cover (Figure 8, Item 4). 14.Torque six bolts (Figure 8, Item 2) to 13 to 15 lb-ft (17 to 20 N·m). NOTE The right adjusting brake cover should have a pipe plug installed at the oil drain line location (shipping). 15.Install new pipe plug (Figure 8, Item 20) (TM 9-2350-277-13&P) if the pipe plug (Figure 8, Item 20) is missing and transmission is to be put in storage. 16.Torque pipe plug (Figure 8, Item 20) to 18 to 22 lb-ft (24 to 30 N·m). Figure 8. Right Adjusting Brake Cover and Gasket Installation. END OF TASK END OF WORK PACKAGE 0016‐10