Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download

Page 116 of 620

TM 9-2520-272-40 0016 INSTALL RIGHT COVER ASSEMBLY NOTE Make sure the right brake adjusting cover has been removed. The brake adjusting cover restricts access to right cover bolt when installing cover. 1. Install new right cover gasket (Figure 4, Item 14) on transmission (Figure 4, Item 16). 2. Install 3/8 inch f at washers (Figure 4, Item 11) on each of two 3/8-16 x 3-1/2 bolts (Figure 4, Item 10), and put bolts through lugs of multiple-leg sling (Figure 4, Item 12). NOTE Bolts must not extend beyond the inside surface of the right cover. If tips of the bolts extend beyond the surface of the right cover, the right cover will not install correctly on the new gasket. 3. Install two bolts (Figure 4, Item 10) in two threaded holes (Figure 4, Item 13) in right cover assembly (Figure 4, Item 1). Figure 4. Right Cover Assembly Gasket Installation. 0016‐6