TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 105 of 620
TM 9-2520-272-40 0015 REMOVE OIL TRANSFER PLATE 1. Remove bolt (Figure 2, Item 8) and washer (Figure 2, Item 9) from oil transfer plate assembly (Figure 2, Item 10). CAUTION A 5/16-inch diameter nylon check ball bearing is located in a bore on the top side of the oil transfer plate assembly, beneath the location of the G2 backup valve assembly. Care should be taken not to turn the oil transfer plate assembly over and drop the ball into the transmission. The ball could damage the transmission if it drops into transmission and is not removed. 2. Remove oil transfer plate assembly (Figure 2, Item 10) and place on a work surface away from the transmission. 3. Remove nylon check ball bearing (Figure 2, Item 7) from oil transfer plate assembly (Figure 2, Item 10). 4. Inspect ball bearing (Figure 2, Item 7) and replace if damaged. Put ball bearing (Figure 2, Item 7) in a secure location. Figure 2. Oil Transfer Plate Removal. 0015‐3