TM-9-2520-254-34 Direct Support for M113 TX100-1 Transmission 2520-00-066-4240 Download
Page 99 of 126
Figure 5-103 Figure 5-105 Figure 5-104 Figure 5-106 Note position of top of clutch pack relative to transmission housing when seated. Install two bolts 4910-572-8701 (8356186) (A) to lock clutch pack in compressed position. Tighten bolts to 10 to o12 pound-feet torque. Remove compressor assembly 4910-572-8643 (8356187) (B). Install reverse-, intermediate-, and low-range clutch pack (A) into housing (B) with slots (C) toward bottom of housing. NOTE When properly installed, front (upper) surface (D) of intermediate clutch reaction plate should aline with rear surfaces of power takeoff openings. Install two clutch anchor pins (A). Flats on pins must seat in slots in clutch pack. Install two spacers (A). Using lifting eye 4910-673- 3801 (10865773), (B) install turbine shaft (C) and high-range clutch assembly (D) as rebuilt in paragraphs 5-17 through 5-21. 5-49