TM-9-2520-254-34 Direct Support for M113 TX100-1 Transmission 2520-00-066-4240 Download
Page 98 of 126
Figure 5-99 Figure 5-101 Figure 5-100 Figure 5-102 Turn assembly over, and position output shaft through hole in table. Install low-range apply plate (A), and alternately install three internal-splined (B) and three external-tanged plates (C). Install intermediate-range planetary carrier (D) and snap ring (E). Install two external-tanged plates (A) and two intern al-splined plates (B). Install intermediate- range reaction plate assembly (C) with notch (D) alined with notch (E). Install intermediate-range piston housing assembly (A), apply plate (B), one internal-splined plate (C), and intermediate-range ring gear (D). Note alinement of clutch apply oil hole (E) with anchor pin slot (F). Install compressor assembly 4910-572-8643 (8356187) (A), to compress low-range (B) and intermediate-range clutch springs (C). When properly assembled and compressed, there will be no clearance (opening) at points (D) and (E). 5-48