TM-9-2520-254-34 Direct Support for M113 TX100-1 Transmission 2520-00-066-4240 Download
Page 57 of 126
Figure 5-17 Figure 5-14 (Step 14). Flatten washer (A) securing flange bolt (B) Figure 5-15 (Step 15). Using a 3/4 inch wrench and an improvised holding tool (A), remove flange bolt (B), flat washer (C), and seal ring (under washer). Figure 5-16 (Step 16). Using improvised output flange removing tool (A) attached to output flange (B), hold tool (A) to keep flange stationary, and pull flange from shaft. Using puller assembly 5120-572-8712 (8356201) pull rear output oil seal (B) from bore in housing (C). 5-7