TM-9-2520-254-34 Direct Support for M113 TX100-1 Transmission 2520-00-066-4240 Download
Page 110 of 126
(2) The test stand must include means for driving the transmission, instruments and controls for measuring and regulating the input torque and speed, an oil cooler which can be connected to the transmission, and linkage to control the manual selector and throttle lever shafts. (3) A suitable method of locking the trans- mission output shaft must be provided. c. Transmission Test Data Log Sheet. A simple transmission test log sheet for recording per- formance data is illustrated in figure 5-141. 5-61. Oil Pressure Readings Use the oil pressures listed in table 5-1 as normal values in testing the transmission. NOTE Certain pressures vary over a wide range because they are influenced by several factors; speed, range in operation, lockup or converter operation, and position of transmission throttle lever influence pressures. All pressures are based on normal (180° to 200° F.) transmission operating temperature. 5-62. Tests a. Warmup. 5-60