TM-9-2520-254-34 Direct Support for M113 TX100-1 Transmission 2520-00-066-4240 Download
Page 101 of 126
Figure 5-109 Figure 5-111 Figure 5-110 Figure 5-112 Insert three puller bolts 4910-572-8699 (8356200) (A) in diaphragm (B) and remove diaphragm. Install needle assembly (A) in washer (B) on diaphragm (C). Install washer (D) on needle assembly with washer lip toward needle assembly NOTE Use oil-soluble grease to hold needle assembly and washer on diaphragm while installing diaphragm in step 28 (fig. 5- 111). Install gasket(s) (A), selected in step 25 (fig. 5- 107). Install guide bolts (B) in pitot tube (C), and set pitot tube in place in pitot collector ring (D). Install diaphragm (E), alining with bolts (F) in flange and bolts (B) in pitot tube bolt holes (G). (Guide bolts are part of set 4910-572-8710 (8356165).) Install seventeen bolts and washers (A), and seat diaphragm (B) against spacers. Remove two bolts (C). Tighten bolts (A) to 17 to 20 pound-feet torque. Remove diaphragm guide bolts (D). (Guide bolts are part of set 4910-572-8710 (8356165).) 5-51