TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 59 of 336
TM 9-2520-238-34 FINAL DRIVE HAS WATER INSIDE 0013 00 INITIAL SETUP: M a i n t e n a n c e L e v e l Direct/General Support T o o l s a n d S p e c i a l T o o l s General mechanic’s tool kit (WP 0033 00, Item 37) P e r s o n n e l R e q u i r e d Track Vehicle Repairer R e f e r e n c e s See your -20 E q u i p m e n t C o n d i t i o n Final drive removed from carrier (See your -20) Disassemble for inspection per repair final drive assemblies A, B (WP 0020 00) T 1. Inspect output shaft oil seal for damage. 2. Are oil seals undamaged? YES NO TN 1. Replace damaged output shaft oil seal (WP 0020 00). 2. Verify no faults found. Y 1. Inspect cover and housing for damage. 2. Are cover and housing undamaged? YES NO YN 1. Replace damaged cover and/or housing if required (WP 0020 00). 2. Verify no faults found. 2Y 1. Inspect oil fill tube and nut for proper fit. 2. Is nut on oil tube undamaged? YES NO 2YN 1. Tighten oil fill tube nut (See your -20). 2. Verify no faults found. 3Y 1. Tighten cover and housing screws. 2. Verify no faults found. 0013 00-1/2 blank