TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 293 of 336
TM 9-2520-238-34 REPAIR SINGLE DISK PIVOT STEER BRAKE ASSEMBLY — Continued 0030 00 CLEANING CLEAN, INSPECT, AND REPAIR 1. Before inspection, repair, or assembly, clean brake housing as described in (WP 0014 00). Clean piston assembly with solution of clean water and mild castile soap. Rinse in clean water until all traces of soap disappear. Wipe dry using a clean dry cloth. 2. Inspect all parts. Refer to (WP 0014 00) for general inspection and repair procedures. 3. Check brake lining for chips, cracks, or excessive wear. If lining thickness is less than 1/4 inch, replace lining. 0030 00-5