TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 274 of 336
TM 9-2520-238-34 REPAIR DIFFERENTIAL RIGHT ANGLE GEARBOX — Continued 0028 00 NOTE If output bevel gear was removed in page 0029 00-2, do Steps 37 - 39. Check that eight cap screws being installed are grade 8 screws (six radial marks on screw heads). 37. Clean threads of eight cap screws (10) and lubricate threads with engine oil. 38. Position bevel gear (11) to hub (3) and secure with eight washers (12) and cap screws (10). Tighten screws to 95-100 lb-ft (129-137 N•m) torque. Use torque wrench (WP 0033 00, Item 43). 39. Install new lockwire (13) between adjacent screws (four places). 40. Lubricate new packing (14) with grease or petrolatum. Install new gasket (15) and packing on plate (2). 0028 00-16