TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 269 of 336
TM 9-2520-238-34 REPAIR DIFFERENTIAL RIGHT ANGLE GEARBOX — Continued 0028 00 9. If inner race (7) of ball bearing was removed, install new race in bevel gear (3). Use remover and replacer (WP 0033 00, Item 24) and bearing inserter. 10. Install ring spacer (8), new key washer (9), and round nut (10) on bevel gear (3). Bend tangs on key washer. 11. Apply a thin film of sealing compound (WP 0035 00, Item 12) or (WP 0035 00, Item 13) to outer edge of encased oil seal (11). C A U T I O N To prevent damage to encased oil seal, do not press seal beyond face of bore. After installation, seal must be flush with outer surface within .032 inch (.081 cm). 12. Install encased oil seal (11) in oil seal retainer (12). Use remover and replacer (WP 0033 00, Item 24) and hammer. 0028 00-11