TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 261 of 336
TM 9-2520-238-34 REPAIR DIFFERENTIAL RIGHT ANGLE GEARBOX — Continued 0028 00 3. Install two 3/8 x 16 cap screws 2 inches (5 cm) long (minimum length) in jacking holes where screws were removed in Step 2. Tighten screws uniformly to separate plate (4) and output hub (8) with attached parts as an assembly from housing (5). 4. Remove laminated shim (9), packing (10), and gasket (11) from plate (4). Discard shim, packing, and gasket. 5. Bend tabs on eight key washers (12). Remove eight cap screws (13), key washers, bearing retainer (14), and laminated shim (15) from plate (4). Discard key washers. 6. Straighten tabs on key washer (16). Remove round nut (17) and key washer from hub (8). Discard key washer. 0028 00-3