TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 246 of 336
TM 9-2520-238-34 REPAIR DIFFERENTIAL STEERING CONTROL ASSEMBLY — Continued 0026 00 5. Inspect ring spacer (1), six sleeve bearings (2), and sleeve bearing (3) in differential flange (4). Remove and discard damaged part(s). Use arbor press. NOTE If inspection of six expansion plugs and three straight pins indicates replacement is required, do Step 6. 6. Remove expansion plug(s) (5) and pin(s) (6) from differential flange (4). Discard plug(s) and/or pin(s). ASSEMBLY NOTE If any of the three straight pins or six expansion plugs were removed from differential flange in page 0027 00-5 above, do Step 1. 1. Install new pin(s) (6) and/or new expansion plug(s) (5) in differential flange (4). Stake each pin(s) four places. Stake each plug(s) two places. NOTE If sleeve bearings or ring spacer were removed from differential flange in page 0026 00-5 above, do Step 2. 2. Install new sleeve bearing (3), sleeve bearing(s) (2), and/or ring spacer (1) in differential flange (4). Use arbor press. 0026 00-6