TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 231 of 336
TM 9-2520-238-34 REPAIR OUTPUT SHAFT ASSEMBLIES — Continued 0024 00 10. Install new key washer (9) and retaining nut (10) on shaft (4). Tighten nut. Bend tabs on key washer (9) over nut. 11. Thoroughly clean threads of four cap screws (11). 12. Apply light coat of antiseize compound to threads of cap screws (11). 13. Install retainer (6) with attached parts on output shaft support (12) with four new key washers (13) and cap screws (11). Tighten screws to 252-300 lb-in (28.5-33.9 N•m) torque. Use torque wrench and socket wrench set. Bend tabs on key washers. 0024 00-9