TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 220 of 336
TM 9-2520-238-34 REPLACE OUTPUT SHAFT ASSEMBLIES — Continued 0023 00 INSTALLATION 1. Install pipe to tube elbow (10) in left output shaft assembly (7) . Clean threads of elbow thoroughly. Apply a light coat of sealing compound to threads at installation. 2. Install left output shaft assembly (7) on right angle gearbox differential (2) . Apply a light coat of antiseize compound to clean threads of six cap screws (12) . Install piston ring (14) on output shaft of right angle gearbox. Install new gasket (13) and left output shaft assembly (7) on right angle gearbox with six new key washers (11) and cap screws (12) . Tighten screws to 55-60 lb-ft (75-81 N•m) torque. Use torque wrench. Bend tabs on key washers. 3. Install pipe plug (15) in right output shaft assembly (1) . Apply a light coat of antiseize compound to clean threads of plug. Install plug in right output shaft. 4. Install right output shaft assembly (1) on differential (2) . Apply a light coat of antiseize compound to clean threads of six cap screws (4) . Install piston ring (6) on output shaft of differential. Install new laminated shim (5) and right output shaft assembly (1) on differential with six new key washers (3) and cap screws (4) . Tighten screws to 55-60 lb-ft (75-81 N•.m) torque. Use torque wrench. Bend tabs on key washers. 0023 00-4