TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 218 of 336
TM 9-2520-238-34 REPLACE OUTPUT SHAFT ASSEMBLIES — Continued 0023 00 REMOVAL C A U T I O N Use care in handling and disassembly to protect machined surfaces and bearings from damage. Provide safe blockage arrangement at work station and place output shaft assemblies in convenient position for disassembly. NOTE Left and right brake adapter are removed and installed in the same manner. 1. Remove four locknuts (1) and adapter (2) from differential output shaft. Discard locknuts. 0023 00-2 Parts of the brake assembly may be coated with asbestos dust. Breathing this dust can harm personnel. Use a filter mask approved for use against asbestos dust. Never use compressed air or dry brush to clean these assemblies. Use an industrial type vacuum cleaner with a high-efficiency filter system to remove dust. Use water and a soft bristle brush or cloth to remove dirt or mud. WARNING