TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 211 of 336
TM 9-2520-238-34 REPAIR BRAKE SHOE ASSEMBLIES — Continued 0022 00 ASSEMBLY NOTE All brake shoe assemblies are assembled the same way. If brake friction linings were removed in (page 0022 00-2), do Step 3. Friction linings must be riveted tightly against the shoe so that a 0.020 inch (0.51 mm) shim cannot be inserted beyond the lengthwise centerline of rivets. Check the color code (stripes) on the side of all three friction linings. All three brake linings must have the same number and color of stripes when installed. Do not mix different types of brake linings. Install a complete new set of three linings each time any lining is changed. 1. Place three new friction linings (1) on shoe (2), shoe (3), and shoe (4). Secure each lining to its respective shoe with 12 new tubular rivets (5). Use brake and clutch reliner. 0022 00-5