TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 208 of 336
TM 9-2520-238-34 REPAIR BRAKE SHOE ASSEMBLIES — Continued 0022 00 DISASSEMBLY WARNING Parts of the brake assembly may be coated with asbestos dust. Breathing this dust can harm personnel. Use a filter mask approved for use against asbestos dust. Never use compressed air or dry brush to clean these assemblies. Use an industrial type vacuum cleaner with a high-efficiency filter system to remove dust. Use water and a soft bristle brush or cloth to remove dirt or mud. C A U T I O N Take care during handling and disassembly to protect machined surfaces, gears, bearings, and components from damage. Provide safe blockage arrangement and place differential into subassemblies. NOTE All brake shoe assemblies are disassembled the same way. Remember position of pipe to tube elbow (1) for proper installation later. 1. Remove hose (2), pipe to tube elbow (1), and pipe plug (3) from brake shoe (4). 0022 00-2